Wuxi Xianglong Plastic Technology Co., Ltd.
Wuxi Xianglong Plastic Technology Co., Ltd.
Add to Cart
Cooling towers are heat rejection devices which reject waste heat to the atmosphere via the cooling of a water stream in order to lower temperature. And if you have never worked in a cooling tower before then you might think that the heart of any cooling towers is the water itself. Although the main purpose of any cooling tower does revolve around water, the true heart of every cooling tower is its fills. We can help get different pvc fills for cooling tower.
Specifications:| Tech Date | |
| Sheet Width(mm) | 500mm |
| Sheet Length | 1000/2000mm/customized |
| Thickness | 0.32-0.6mm/customized |
| Sheet Spacing | 30/33mm |
| Color | grey/white/black |
| Material | PP/PVC/CPVC |
Cooling tower filling, also named as cooling tower fill media, or cooling tower fill pack, or cooling tower infill, or cooling tower filler, is made of PVC or PP plain plate, hot pressed in a certain mould and produced with different designs and sizes.
Cooling tower fill is a very important component for water and gas exchanging in cooling towers. It is located in the middle or bottom of the cooling tower. Some cooling towers would be full of the fill media, some would have half and half of the fill media, and some large cooling towers would be installed 1 layer of the fill media in the bottom.
The function of cooling tower filling is to increase the contact area between hot water and air and to extend the time of water flow, thus to help reduce the water temperature quickly. It is widely used in many kinds of cooling towers, especially industrial cooling tower, such as nuclear plant, energy and mining, big factory, thermal power factory, large steel mill, etc.